AZUD LUXON LXE

Automatic electric screen filters suitable for all applications, and available in a wide range of micron sizes, all with the same high quality guarantee of AZUD.

Advantage

  1. Energy efficient
    The consumption of water in the flushing cycle is minimal.

  2. Wide selection of screens
    From 10 to 1.000 micron.

  3. Versatility
    From 3″ to 20″.

  4. Resistance
    Tempertures to 60ºC.

  5. Large screen area
    Up to 21.300 cm2.

  6. Resistant  material
    The screen is manufactured in high quality stainless steel.

  7. Time saving
    The filtration process and the flushing cycle occur simultaneously.

  8. Easy installation
    The filters are delivered to be installed.

Specifications

MODELS
  • LXE 2700 S
  • LXE 5400 S
  • LXE 8000 S
  • LXE 10600 S
  • LXE 13200 S
  • LXE 16500 S
  • LXE 21300 S

Screen support

Stainless steel

Manifold

3″ – 4″ – 6″

Filtration area (cm²)

2650

Screen support

Stainless steel

Manifold

4″ – 6″ – 8″

Filtration area (cm²)

5380

Screen support

Stainless steel

Manifold

6″ – 8″ – 10″ – 12″

Filtration area (cm²)

7990

Screen support

Stainless steel

Manifold

8″ – 10″ – 12″ – 14″

Filtration area (cm²)

10600

Screen support

Stainless steel

Manifold

8″ – 10″ – 12″ – 14″

Filtration area (cm²)

13200

Screen support

Stainless steel

Manifold

8″ – 10″ – 12″ – 14″ – 16″

Filtration area (cm²)

16500

Screen support

Stainless steel

Manifold

10″ – 12″ – 14″ – 16″ – 18″ – 20″

Filtration area (cm²)

21300

Additional Info.

FILTRATION PHASE

Raw water enters from the inlet manifold to the coarse screen,trapping larger particles that could interfere with the filtercleaning mechanism -in vertical models, large and heavyparticles are separated by gravity.

Then water flows IN-OUT through the weave wire screen, trapping in the inner screen surface bigger particles than the filtration degree. Clean waterflows out through the outlet manifold . Particles build-up createsa filter cake that increases the pressure differential between inletand outlet, and this activates the cleaning cycle when the pre-setpoint is reached.

SELF-CLEANING PHASE

Clean water supply is not interrupted when the cleaning cycle isactivated. The cleaning phase starts with the opening of the drainvalve, that creates a pressure gradient between the pressurizedinner filter and the atmosphere. At the same time, the suctionnozzle scanner spirals along the complete inner surface of the screen.

As a result of the pressure difference, a high velocity SuctionEffect is created at the inlet of the nozzles, making the waterflows OUT- IN through the filter element and vacuuming all theparticles retained on the screen surface.